Set up Wi-Fi connection

Read on below to find out how you can connect your Stadler Form device using the Smart Life – Smart Living app. Monitor air quality and control your Stadler Form device anywhere.

The Smart Life app

The Smart Life – Smart Living app is the control centre for all your smart home devices. You can use this app to control any devices which are fitted with a Tuya chip. You need an account to control your device using the app. Start by downloading the app from the App Store or via Google Play and then installing it. 

Then, create an account and log in. Make sure your Wi-Fi is turned on for your phone. Check to see if the Wi-Fi button on your device is blinking for Roger, or the blue light is blinking for Eva. If it is not blinking, you must press the Wi-Fi button for about three seconds until blinking occurs. Your device should show up automatically in the app. If not, you should press the + button in the right-hand corner. Click on your device. Enter your Wi-Fi password. You are all set. You can now control your device with your phone when connected to the Wi-Fi network.